TEETER

Teeter base is made of 2” PVC. The board is 2”x12”x12’ primed and painted with non-skid exterior paint. Hardware is included to attach the board to the base.

WOBBLE BOARD

Wobble board is great agility training tool for puppies. The wobble board is made of 3/4" plywood, with a 6" ball attached underneath. The wood surface is primed & painted with exterior non-skid paint.

ADJUSTABLE TRAINING ARCH

This adjustable training arch is made of 1" PVC. The arch is easily adjustable to 22", 24", 26" and 28".

ADJUSTABLE TABLE

Adjustable table is made of 2” PVC. Top of the table is made of ½” plywood with 4” boarders primed and painted with non-skid exterior paint. The table heights are 8”, 16”, and 24”.

ADJUSTABLE PAUSE TABLE

This sturdy table is made of 2" sched. 40 PVC. This table works best with uneven surfaces. Top of the table is made of 1/2" plywood with 4" boarders primed and painted with non-skid exterior paint.

Adjusts table height to 8", 16" and 24".

AKC DOG WALK

Dog Walks are made of 2”x12”x12’ wood planks with 2”x4” wood supports underneath and have wood slats on the ramps. The two stands are made of 2” PVC. The wood surfaces are primed and with exterior non-skid paint.

The Dog Walks are constructed with bolts and screws. No nails are used. Time frame for building is about 2 weeks. I would be happy to deliver.

TRAINING DOG WALK

Training dog walk is made of 2"x 12"x 8' wood planks with slats on the ramps. The sections are hinged together which allows for setup at any angle, including lying planks flat on the ground. The two stands are 30" saw horses. The wood surfaces are primed and painted with exterior non-skid paint.

DOG WALK BASE

Dog Walk base is made of 2” PVC and is available in 36” or 48.”

AKC A-FRAME

A-Frames are made from ½” plywood panels with 2”x4” wood supports underneath. The panels are hinged at the top, have chains to secure position for the different height adjustments, and have wood slats on the ramps. The wood surfaces are primed and painted with exterior non-skid paint. The standard color is green with a yellow contact area. No nails are used; the A-Frames are constructed with bolts and screws.
Time frame for building this is about 2 weeks. I would be happy to deliver.

CONTACT TRAINER

6'x1' bridge ramp and 4'x3' A-frame ramp. Contact trainer is lightweight and folds in half for easy storage. Adjustable side chains for any angle. Primed & painted with non-skid exterior paint.